How Much Does It Cost to Remodel a Kitchen in Illinois?
If you've been saving kitchen photos and wondering what a remodel will really cost, we're glad you found this page. Search for prices in Arlington Heights, Palatine, and surrounding areas, and you'll see figures anywhere from $22,000 to $150,000 for 2026. That's a wide range, and it's hard to tell where your kitchen fits. In our own projects, a full kitchen realistically starts in the mid $40,000s. The least expensive kitchen we completed this year cost $45,000.
Most homeowners come to us with a wishlist of kitchens they've been saving, usually with an island and custom or semi-custom cabinetry. Once we price every item on that list, most wishlist kitchens come to $60,000 to $90,000. Full gut or premium remodels run $85,000 to $150,000 or more. Two things drive the final number more than anything else. The first is the size of your kitchen and the cabinetry you choose. After that, it depends on how much of your current layout you keep in place.
At Cabinets Plus, we wrote this guide because we'd rather you know the real numbers before you sit down with a designer. An honest picture now helps you plan with no surprises later. Every figure covers a complete kitchen. These are not cabinets-only or materials-only prices. Appliances are the one exception, and they get their own section below.
The Short Version
If you only have a minute, these are the numbers we'd want you to have.
- A full kitchen starts in the mid $40,000s.
- Most wishlist kitchens cost $60,000 to $90,000.
- Mid-range remodels run $45,000 to $85,000.
- Full gut or premium kitchens run $85,000 to $150,000 or more.
- Budget roughly $175 to $450 per square foot.
- Cabinetry takes 30% to 40% of the budget, and labor and installation take 20% to 30%.
- Moving plumbing or electrical adds $3,000 to $15,000.
- Appliances are bought separately and sit outside our contract price.
These ranges cover homes in Arlington Heights, Palatine, and surrounding areas, and they come from our own kitchen design and remodel projects.
As a general guide, kitchens in the western and northwest suburbs cost about $175 to $450 per square foot in 2026, depending on the scope and the materials.
That $45,000 figure comes from a real project. It was a small condo kitchen replaced like-for-like, with everything going back in the same place, and it used Medallion cabinetry. We consider that the real floor for a full kitchen done properly by a design-build company. If your budget starts near there, we'd be glad to talk it through with you.
| Project Type | Typical Scope | Typical 2026 Cost |
|---|---|---|
| Mid-range remodel | A few layout changes, with semi-custom or custom cabinetry | $45,000 to $85,000 |
| Full gut or premium | Structural changes and moved services, with premium finishes | $85,000 to $150,000+ |
What $45,000 and $133,000 Look Like
Numbers mean more when you can see them, so here are two finished kitchens that sit near opposite ends of what we build. Have a look at both, and you can see more of our work in the kitchen gallery.
A $45,000 Kitchen
This kitchen shows where a full remodel starts for us. It has an L-shaped layout with dark shaker-style cabinets that run most of the way across the walls, and the dark brick-style tile on the backsplash gives the room character. Light countertops brighten the space. The sink is an undermount with a gooseneck faucet, and the floor is a light gray wood look.
A $133,000 Kitchen
This kitchen costs around $133,000 and sits under a vaulted ceiling with exposed beams, next to an open staircase. The whole space feels open and bright. A U-shaped layout with a peninsula holds the sink. The lower cabinets are a warm natural wood, and the uppers are white with crown molding. White countertops sit against a soft beige square tile backsplash, and three glass pendant lights hang over the peninsula. Wall sconces warm the room in the evening, and the floor is a warm gray wood look.
Reality TV Budgets vs Real Life
We love a good renovation show too, and they're great for ideas. They just set expectations that most projects can't match. Production companies often receive supplier discounts that aren't available to the average homeowner, and part of the labor you see on screen may be paid outside the project budget.
Timelines get the same treatment. A remodel that looks like it took a week may have been edited down from many weeks of work. Those edits help explain why the numbers on TV and online feel so far from the quotes homeowners receive. A kitchen budget must cover the full design process and every cabinet, plus the crew that installs them.
Why Size and Cabinetry Move the Number Most
Two kitchens in the same town can cost thousands of dollars more or less, and size is the main reason. A larger kitchen needs more runs of cabinets, and those cabinets alone can reach $50,000 before you add countertops or labor.
The number climbs further once you move into semi-custom or custom cabinetry. At that point, you start choosing non-standard sizes and the extras that make a kitchen genuinely nice to live in. Those extras include:
- Deep pull-outs
- Drawer dividers
- Spice and tray organizers
- Corner solutions
- Specialty accessories
Each of these makes daily use easier. Together, they explain why a wishlist costs more than most people expect.
If you have a large kitchen and want to stay under $85,000, you'll need to make deliberate choices. You'll want to lean on stock cabinets in standard sizes and keep the accessories simple. That's very achievable, and we're happy to design it that way. On a big footprint, it just needs to be a choice you make on purpose.
Stock and Premium Cabinets
Stock can sound like off-the-shelf, but we don't keep cabinets on a shelf. We make every cabinet we sell to order. A stock line such as Medallion comes in standard sizes with fewer finish options, and its construction helps keep the cost down. We've worked with Medallion for a long time and stand behind its quality within its price bracket.
A premium line such as Mouser gives you more sizes and finishes, deeper customization, and the construction options a custom kitchen calls for. Neither line is better in every situation. Our job is to help you choose the one that suits your kitchen and your budget, and you can read more on our kitchen cabinets page.
Remove and Replace or Full Redesign
A remove-and-replace remodel keeps your current layout and replaces what's already there. Nothing structural moves, so it's the more budget-friendly route, and you still end up with a brand-new kitchen.
A full redesign changes the floor plan. Walls may come out or go up, and the plumbing and electrical move to match. That opens the door to a bigger island or a more open room, and it brings a bigger budget with it. Either path can be the right one, and our kitchen remodeling guide explains what to expect from each.
Placement Is the Biggest Lever on Your Budget
Here's the single most important thing to understand before you set a number. Where things sit in your kitchen affects your budget more than almost any other choice you make.
Keeping your sink and range roughly where they are leaves the plumbing and electrical untouched, and that keeps costs down. Moving them is a different story. Shifting a sink, moving a range to another wall, or adding an island with water or power brings new rough-ins. Rough-ins are the pipes and wiring that run behind your walls and floors. Patching comes next, followed by inspections and sometimes structural work. Plan on $3,000 to $15,000 for moving plumbing or electrical.
That doesn't rule out moving things. When your current layout truly doesn't work, a change is worth every dollar. We'll tell you honestly whether a move adds value or whether you can get what you want inside your existing footprint.
Why You'll See $22,000 Online
You'll find figures as low as $22,000 reported online, so it's worth being straight about them. In our own projects, we've never completed a full kitchen at that price.
A number near $22,000 almost always describes one of these projects:
- A partial remodel in place of a full renovation.
- A cosmetic refresh that swaps or refinishes surfaces and leaves the layout alone.
- A very small kitchen.
To come close to that figure, most of the following need to be true at the same time:
- The kitchen is small, or only part of it gets updated.
- The existing layout stays exactly as it is, so nothing plumbed or wired moves.
- The cabinets come from a stock line in standard sizes with no custom dimensions.
- Accessories and add-ons stay to a minimum.
- Countertops and finishes are mid-range.
A $22,000 figure describes a specific, modest project, and it's a fair number for that kind of kitchen. Most homeowners picture something larger when they start saving ideas, and there's nothing wrong with wanting that.
Where the Money Goes
Knowing how a budget breaks down helps you spend where it counts:
Cabinetry
Is almost always the biggest line in a kitchen budget, at roughly 30% to 40%. It also shows quality more than anything else you buy, so it's worth getting right.
Countertops
Are usually the second largest material cost. Flooring and lighting come next, followed by the appliances you purchase separately.
Labor and installation
Take 20% to 30% of the budget. Our installers are in-house employees, not day-rate subcontractors, which gives us control over the schedule and how the work gets done. As a result, quality stays consistent from demolition to the final adjustment. However, schedules can still slip occasionally, and when they do, we tell you promptly and explain why. You can meet the people behind the work on our team page.
Fixtures
Add up faster than most people expect. A premium pull-down faucet paired with a workstation sink can become a significant cost on its own, before anyone installs it.
Smart Choices That Stretch Your Budget
Beyond layout, a few decisions consistently give you more kitchen for your money:
Keep the footprint and upgrade the finishes
If your layout works, put what you save by keeping it in place into better cabinetry and countertops you'll use every day.
Mix material tiers
Spend on the surfaces you use most and see the most wear and choose value options where it won't show or matter.
Decide early and stick with it
Most budget overruns start when someone changes their mind mid-project, so make your decisions during design, before anyone picks up a tool. That's the cheapest way to build.
Our design service is built around these tradeoffs. We help you choose materials that suit both your kitchen and your budget, and we supply and install them under one contract price, so you're never left sourcing pieces or coordinating trades yourself.
What Your Contract Price Covers
We work from a fixed contract price that we agree on with you before any work begins. We do this so you know your number before we start. During design, we plan the full kitchen with you and price everything it takes to reach the finish you want.
Two situations can add to it:
Site surprises
Once demolition starts, a job occasionally uncovers something nobody could have seen beforehand, such as water damage behind a wall or outdated wiring. When that happens, we show you exactly what we found and what it takes to fix it before we start, so you're never left guessing. Certain discoveries need specialist trades, and we talk through the best way forward with you.
Changes you request
If you change the scope after we agree on the design, for example by choosing a different countertop or adding a feature, we write a change order and price it clearly. You approve every change before we proceed.
Beyond those two situations, the price we agree on is the price you pay. We don't pad estimates or drip-feed extras.
Appliances Sit Outside the Price
Appliances are the one part of your kitchen that you buy yourself, through the retailer of your choice. That way you pick the models and the pricing you like. Because you buy them directly, they sit outside our contract price and need their own line in your budget. We're happy to coordinate delivery timing and install them as part of the build, so everything arrives on schedule.
If You're Handy, We Offer Two Options
If you're handy and want to save, we offer two options that keep more of the labor in your hands.
Wholesale
is cabinets only. We design the kitchen and supply the made-to-order cabinets, and you handle the installation yourself.
White room
is cabinets plus cabinet installation. Once your room is ready, with walls, plumbing, and electrical all-in place, we come in and fit the cabinetry. You complete the rest of the finishing.
Both options give you our design work and cabinet quality at a lower total cost.
Here are a few questions that tend to come up once the numbers start to sink in. If yours isn't here, ask us anytime.
Talk Through Your Kitchen with a Designer
Every kitchen is different, so the most reliable way to find your number is to sit down with a designer and walk through your space and your budget. If you live in Arlington Heights, Palatine, or the surrounding areas, we'd love to meet you at our
Palatine showroom.
We'll help you plan a kitchen and a contract price that fit together. If you'd like to hear from past clients first, you can read their reviews.




